The PIR sensor switch is for use inside a cabinet or wardrobe. The large detection range means the sensor can be positioned at the back of the cabinet if required.
Hint
> Suitable to be used with 12V or 24V products without an integrated sensor. > Works as an on/off switch for lighting installed inside cabinets or wardrobes. Mount in a side panel or back panel of an internal unit. > Small and discreet product. > Sensor has a 1.5m cable to the sensor, a 300mm cable with JB4 plug to connect to the driver and a 4 port JB4 distribution block for light connection. > A dial on the front of the sensor unit allows you to select the time delay on the sensor (from 10 seconds to 3 minutes). > 80 ° detection angle. > 0.5m - 2.5m detection range. > Can be used in kitchens or bedrooms. > Requires a 20mm hole-cut
Selecting the right driver
Connecting by Colour