Recommended Location

Description

Ordering options
Product Features
Product Features
  • FinishAluminium

    Hint

  • Cable Length1.5 metres

    Hint

Key points:

Product FAQs
Product FAQs

Does 'boxing in' the receiver affect the detection range of the remote control?

It depends on the material which the receiver is positioned behind. Wood for example does not affect the detection range, however metal will reduce the detection range to a degree. The detection range will also be affected if enclosed within a wall.

Does this product have a memory function?

Yes. When dimming your lighting using the SE40520, your settings will be remembered when you switch off your lighting. When you switch your lights back on, the last light level setting will be applied.

How many sensors can be used on one driver?

Sensors do not have their own wattage, therefore any amount of sensors can be used until they fill up the ports of the driver. The amount of lights that can be used on one driver is dependant upon the wattage of the lights and the wattage of the driver. To work out how many lights can be used on one driver divide the wattage of the driver by the wattage of the lights. A 24W (12V) driver used with the sensor will be maxed out one 24W has been used up.

Can you use 2 sensors on one light?

Yes.

Can sensors be used in the bathroom?

No. Our sensors are not IP rated so therefore they need to be installed outside the bathroom.

Can our products be used with those of other manufacturers?

We have not tested this so therefore do not recommend it.

Do I connect the "input" or "output" cable to the driver?

The "input" cable should be connected to the driver. The "output" cable should be connected to the light.

See more FAQs (5)
Downloads
Downloads
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver
close