SE10245R0

RGB Colour Changing

RGB 2 Colour Changing Flexible LED Strip

SE10245R0

RGB Colour Changing

RGB 2 Colour Changing Flexible LED Strip

 The RGB strip is our newest colour changing flexible strip which interchanges between 7 colours with 3 different effects. The product comes with a 3M adhesive strip for easy installation and it can be cut to length which makes it perfect for any kitchen or room. Packs now include our latest 3-in-1 remote which is even better than the previous RGB remote with more functions and can be linked with other lights in addition to the RGB strip.

Recommended Location

Hint

Can be used almost anywhere, use this versatile product to create stunning effects

Read more
RRP: £16.24
Description

 The RGB strip is our newest colour changing flexible strip which interchanges between 7 colours with 3 different effects. The product comes with a 3M adhesive strip for easy installation and it can be cut to length which makes it perfect for any kitchen or room. Packs now include our latest 3-in-1 remote which is even better than the previous RGB remote with more functions and can be linked with other lights in addition to the RGB strip.

Ordering options
Ordering options
 CodeLED ColourDriverControllerLengthLumensPack QtyWattageStockRRPQty
SE10225R0RGB
 2000mm660 lm110WIn Stock£54.24
SE10225R1.1RGB30W included in pack 3-in-1 remote2000mm660 lm110WIn Stock£146.94
SE10245R0RGB
Remote & Receiver500mm165lm 2.5WIn Stock£16.24
 IDCodeLED ColourDriverControllerLengthLumensPack QtyWattageStockRRPQty
SE10225R0RGB
 2000mm660 lm110WIn Stock£54.24
SE10225R1.1RGB30W included in pack 3-in-1 remote2000mm660 lm110WIn Stock£146.94
SE10245R0RGB
Remote & Receiver500mm165lm 2.5WIn Stock£16.24
CodeDescriptionStockColour CodingRRPQty
SE40553 6W Driver with 4 Port JB4 Distribution Block InStock
£17.40
SE40555 15W LED Driver with 6 Port JB4 Distributor InStock
£23.04
SE40556 Sensio LED 24V 30W Driver with 12 port LED Block InStock
£37.68
SE40557.1 LED 24V 60W Driver with 12 port LED block InStock
£59.40
SE40599 30W Dimmable Driver InStock
£52.20
CodeDescriptionStockColour CodingRRPQty
Product Features
Product Features
  • FinishWhite

    Hint

  • LED ColourRGB

    Hint

    7 pre-set colours. Set to one colour or select a colour changing option to create stunning lighting effects

    Read more
  • Beam Angle120°

    Hint

  • Dimmable*Dimmable

    Hint

    This light is dimmable via dimming controls from the Sensio range

  • IP RatingIP54

    Hint

only compatible with Sensio dimmer switchers/controls

Key points:

> Registered Design Right - 6024619

> 7 colours, 3 effects
> Pre-set colours available
> Great for mood lighting
> Function available to cycle through colours
> Cycle can be slow or quick colour change
> Self-adhesive 3M tape on back for installation
> Male and female ends allow you to create required length
> Can be cut to length (every 100mm)
> Operate using the RGB Remote Control or Sensio Multi-Light App
> One remote will control all receivers within 15m radius
> Multiple receivers can be controlled by one remote
> Maximum length of 12m from a 60W Driver
> IP54 rated - Limited ingress of dust permitted (no harmful deposit)
and protected against sprays from any angle, e.g. splashes of water
> 50,000 hours lamp life

Product FAQs
Product FAQs

Can I run flexible strip lighting under a dishwasher?

The flexible strip itself cannot be run along/under the dishwasher, we supply extension cables for the flexible strips which would need to be interlinked and run around the back of the dishwasher to not break the run of strips.

If I cut the flexible strip will the wattage remain the same?

No, the wattage of the strip would be reduced by how much is cut off (how many LED's). For example if a 2m strip has a wattage of 15W and 1m is cut off the wattage of the 2m strip will reduce to 7.5W.

One end of the flexible strip appears to be blank.

The male end of every flexible strip is supplied with an end cap covering the pins to protect them. For interlinking and connecting to the driver connection cable this end cap must be removed.

What is the lumen value of the cool white option?

180lm

How do you connect them - do you need a connection cable?

You connect them by pushing them together. You do not need a connection cable.

Can our products be used with those of other manufacturers?

We have not tested this so therefore do not recommend it.

Can I use a wall dimmer (not a Sensio product)?

We have not tested whether our products are compatible with other dimmers, therefore we recommend using our dimmers/switches.

See more FAQs (5)
Downloads
Downloads
Accessories
Accessories
Quantity
Quantity
SE10328
RRP: £3.12
Quantity
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver
close