SE10755C0

Primo

Primo 5m Clip LED Flexible Strip - Cool White

SE10755C0

Primo

Primo 5m Clip LED Flexible Strip - Cool White

The Primo flexible strip light is our longest stip light yet at 5m, meaning that you only need to purchase one strip for your entire kitchen. New innovations mean that the stirip can be cut and reused up to 50 times. Available in both cool and warm white, this strip is perfect for any kitchen and room around your house.

Recommended Location

Hint

Can be used almost anywhere, use this versatile product to create stunning effects

Read more
RRP: £58.80
Description

The Primo flexible strip light is our longest stip light yet at 5m, meaning that you only need to purchase one strip for your entire kitchen. New innovations mean that the stirip can be cut and reused up to 50 times. Available in both cool and warm white, this strip is perfect for any kitchen and room around your house.

Ordering options
Ordering options
 CodeLED ColourDriverColour TemperatureLengthLumensWattageStockRRPQty
SE10755C0Cool White
5000K5m1990lm18WIn Stock£58.80
SE10755C1Cool White30W included in pack 5000K5m1990lm18WIn Stock£98.54
SE10755W0Warm White
3000K5m1985 lm18WIn Stock£58.80
SE10755W1Warm White30W included in pack 3000K5m1985 lm18WIn Stock£98.54
 IDCodeLED ColourDriverColour TemperatureLengthLumensWattageStockRRPQty
SE10755C0Cool White
5000K5m1990lm18WIn Stock£58.80
SE10755C1Cool White30W included in pack 5000K5m1990lm18WIn Stock£98.54
SE10755W0Warm White
3000K5m1985 lm18WIn Stock£58.80
SE10755W1Warm White30W included in pack 3000K5m1985 lm18WIn Stock£98.54
CodeDescriptionStockColour CodingRRPQty
SE40553 Sensio LED 6W 24V Driver with 4 Port LED Block InStock
£17.40
SE40555 Sensio LED 24V 15W Driver with 6 port LED Block InStock
£23.04
SE40556 Sensio LED 24V 30W Driver with 12 port LED Block InStock
£37.68
SE40557.1 LED 24V 60W Driver with 12 port LED block InStock
£59.40
SE40599 30W Dimmable Driver with 12 Port JB4 Distributor InStock
£52.20
CodeDescriptionStockColour CodingRRPQty
Product Features
Product Features
  • FinishWhite

    Hint

  • LED ColourCool & Warm White

    Hint

    This fitting is available in either cool white or warm white LED

    Read more
  • Beam Angle120°

    Hint

  • Dimmable*Dimmable

    Hint

    This light is dimmable via dimming controls from the Sensio range

only compatible with Sensio dimmer switchers/controls

Key points:

Registered Design Right - 6024616

> Can be cut and re-used up to 50 times
> Illuminate several areas of a room with one strip
> Self-adhesive 3M tape on the back of the fitting for installation
> Supplied as 5m reel
> Can be cut to length (every 100mm)
> Suitable for multiple areas - including plinth, over / under cabinet
> IP20 rated - protected against solid objects over 12mm (e.g. fingers)
> 50,000 hours lamp life
> IP20 rating

Product FAQs
Product FAQs

Can the cable on this fitting be extended?

Yes. We offer a 2.5m extension cable (SE9009). Please see the accessory listing below.

Can I run flexible strip lighting under a dishwasher?

The flexible strip itself cannot be run along/under the dishwasher, we supply extension cables for the flexible strips which would need to be interlinked and run around the back of the dishwasher to not break the run of strips.

If I cut the flexible strip will the wattage remain the same?

No, the wattage of the strip would be reduced by how much is cut off (how many LED's). For example if a 2m strip has a wattage of 15W and 1m is cut off the wattage of the 2m strip will reduce to 7.5W.

How do you connect them - do you need a connection cable?

You connect them by pushing them together. You do not need a connection cable.

Can our products be used with those of other manufacturers?

We have not tested this so therefore do not recommend it.

Can I use a wall dimmer (not a Sensio product)?

We have not tested whether our products are compatible with other dimmers, therefore we recommend using our dimmers/switches.

See more FAQs (4)
Downloads
Downloads
Accessories
Accessories
SE9009
RRP: £3.00
Quantity
SE100050
RRP: £1.44
Quantity
SE101050
RRP: £2.40
Quantity
SE101080
RRP: £4.08
Quantity
SE100750
RRP: £4.44
Quantity
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver
close