SE10445D0

DuoFlex

DuoFlex Dual Colour Flexible Strip

SE10445D0

DuoFlex

DuoFlex Dual Colour Flexible Strip

The DuoFlex is a 3-in-1 strip light which can be easily switched between cool white, natural white and warm white by simply flicking the switch on the fitting. This is great for any kitchen as it means that you don't have to worry about whether your lights will match with your worktop or furnishings. This strip light can be used with our 3-in-1 remote and the multi-light app, making it a versatile and easily controllable product. This strip is perfect for any kitchen.

Recommended Location

Hint

Can be used almost anywhere, use this versatile product to create stunning effects

Read more
RRP: £20.02
Description

The DuoFlex is a 3-in-1 strip light which can be easily switched between cool white, natural white and warm white by simply flicking the switch on the fitting. This is great for any kitchen as it means that you don't have to worry about whether your lights will match with your worktop or furnishings. This strip light can be used with our 3-in-1 remote and the multi-light app, making it a versatile and easily controllable product. This strip is perfect for any kitchen.

Ordering options
Ordering options
 CodeLED ColourDriverColour TemperatureControllerLengthLumensPack QtyWattageStockRRPQty
SE10425D0Cool, Natural & Warm White
2700-5000K 2000mm780 lm110WIn Stock£57.72
SE10425D1.1Cool, Natural & Warm White30W included in pack 2700-5000K3-in-1 remote2000mm780 lm110WIn Stock£156.95
SE10445D0Cool, Natural & Warm White
2700-5000K 500mm195Lm12.5WIn Stock£20.02
 IDCodeLED ColourDriverColour TemperatureControllerLengthLumensPack QtyWattageStockRRPQty
SE10425D0Cool, Natural & Warm White
2700-5000K 2000mm780 lm110WIn Stock£57.72
SE10425D1.1Cool, Natural & Warm White30W included in pack 2700-5000K3-in-1 remote2000mm780 lm110WIn Stock£156.95
SE10445D0Cool, Natural & Warm White
2700-5000K 500mm195Lm12.5WIn Stock£20.02
CodeDescriptionStockColour CodingRRPQty
SE40553 6W Driver with 4 Port JB4 Distribution Block InStock
£17.40
SE40555 15W LED Driver with 6 Port JB4 Distributor InStock
£23.04
SE40556 Sensio LED 24V 30W Driver with 12 port LED Block InStock
£37.68
SE40557.1 LED 24V 60W Driver with 12 port LED block InStock
£59.40
SE40599 30W Dimmable Driver InStock
£52.20
CodeDescriptionStockColour CodingRRPQty
Product Features
Product Features
  • FinishWhite

    Hint

  • LED ColourCool White, Natural White & Warm White

    Hint

    Cool & warm white diodes integrated, seamlessly mix the colours to create the perfect mood

    Read more
  • Beam Angle120°

    Hint

  • Dimmable*Dimmable

    Hint

    This light is dimmable via dimming controls from the Sensio range

  • DriverGreen 24V

    Hint

  • IP RatingIP54

    Hint

only compatible with Sensio dimmer switchers/controls

Key points:

Registered Design Right - 6024620

> Seamlessly mix colour to create the perfect mood
> Can be easily alternated between cool white, natural white and warm white, and anything in between
> Self-adhesive 3M tape on back for installation
> Male and female ends allow you to create required length
> Can be cut to length (every 100mm)
> Cut the strip ONCE and that will create the end of the run. The cut piece with female end cannot be reused
> Operate using a DuoFlex compatible remote control or Sensio Multi-Light App
> One remote will control all receivers within 15m radius
> Maximum length of 6m can be run from each receiver
> 10 brightness levels
> Dims and brightens in 10% increments
> IP54 rated - Limited ingress of dust permitted (no harmful deposit)
and protected against sprays from any angle, e.g. splashes of water
> 50,000 hours lamp life

> SE10425D1.1 pack contains: SE10425D0, SE10325, SE40555, SE 1004100, SE791990
> DuoFlex Receiver SE1004100 is required to run the DuoFlex strips.

Product FAQs
Product FAQs

Can I run flexible strip lighting under a dishwasher?

The flexible strip itself cannot be run along/under the dishwasher, we supply extension cables for the flexible strips which would need to be interlinked and run around the back of the dishwasher to not break the run of strips.

Can I bend the flexible strip on a corner?

No, the flexible strip cannot be bent on a corner, to get around corners you should use the 50mm corner connection cable.

If I cut the flexible strip will the wattage remain the same?

No, the wattage of the strip would be reduced by how much is cut off (how many LED's). For example if a 2m strip has a wattage of 15W and 1m is cut off the wattage of the 2m strip will reduce to 7.5W.

One end of the flexible strip appears to be blank.

The male end of every flexible strip is supplied with an end cap covering the pins to protect them. For interlinking and connecting to the driver connection cable this end cap must be removed.

How do you connect them - do you need a connection cable?

You connect them by pushing them together. You do not need a connection cable.

Can our products be used with those of other manufacturers?

We have not tested this so therefore do not recommend it.

Can I use a wall dimmer (not a Sensio product)?

We have not tested whether our products are compatible with other dimmers, therefore we recommend using our dimmers/switches.

See more FAQs (5)
Downloads
Downloads
Accessories
Accessories
Quantity
SE1004100
RRP: £37.62
Quantity
Quantity
SE10328
RRP: £3.12
Quantity
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver
close