CL03.1000.0610

Quadra Classic

Quadra PLUS-I LED In Cabinet Light with IR Sensor

CL03.1000.0610

Quadra Classic

Quadra PLUS-I LED In Cabinet Light with IR Sensor

Neat and stylish lighting just where you need it. This discreet in cabinet light has an IR sensor built into the end of the fitting.

RRP: £20.20 Offer: £7.46
Description

Neat and stylish lighting just where you need it. This discreet in cabinet light has an IR sensor built into the end of the fitting.

Ordering options
Ordering options
 CodeStockOfferQty
CL03.1000.0610In Stock£7.46
 IDCodeStockOfferQty
CL03.1000.0610In Stock£7.46
Product Features
Product Features
  • FinishAluminium

    Hint

  • LED ColourCool & Warm White

    Hint

    This fitting is available in either cool white or warm white LED

    Read more
  • Beam Angle140°

    Hint

  • Cable Length1.5 metres

    Hint

  • SensorInfrared Sensor

    Hint

Key points:


> The lens of the fitting has a Triphosphur coating to ensure an even spread of light
 
> IR sensor integrated on the front edge of the fitting, the light is activated on the opening of the cabinet door. When the door is closed the light will switch off
 
> Low wattage fitting – minimal energy usage
 
> Ideal for smaller cabinets
 
> Both cool white and warm white available, choose which best suits the cabinetry
 

Product FAQs
Product FAQs

Can the cable on this fitting be extended?

Yes. We offer a 2.5m extension cable (SE9009). Please see the accessory listing below.

Why are my lights flashing?

This can be caused by one of many things; 1. The lights are running from a driver of an incorrect voltage. 2. The fitting has been wired to an incompatible dimmer. 3. You have overloaded your LED driver. Please calculate the wattage of the connected lights and ensure this does not exceed the total wattage allowance of the connected driver.

Can our products be used with those of other manufacturers?

We have not tested this so therefore do not recommend it.

Can I use a wall dimmer (not a Sensio product)?

We have not tested whether our products are compatible with other dimmers, therefore we recommend using our dimmers/switches.

See more FAQs (2)
Downloads
Downloads
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver
close