SE30115C0

Lumo

Lumo IP65 Flexible Strip-1M - Cool White

SE30115C0

Lumo

Lumo IP65 Flexible Strip-1M - Cool White

Use the Lumo IP65 flexible strip to introduce stunning mood lighting into your bathroom. Create stunning effects by enhancing features or main focal points. If you have niches in your bathroom, illuminate them with an IP rated flexible strip light.

RRP: £29.66 Offer: £14.83
Description

Use the Lumo IP65 flexible strip to introduce stunning mood lighting into your bathroom. Create stunning effects by enhancing features or main focal points. If you have niches in your bathroom, illuminate them with an IP rated flexible strip light.

Ordering options
Product Features
Product Features
  • LED ColourCool White

    Hint

    Cool white LED provides the brightest light, perfect for internal lighting or task lighting in a modern setting

    Read more
  • Beam Angle110°

    Hint

  • IP RatingIP65

    Hint

Key points:

> This high output IP65 rated flexible LED strip light is available in 1m and 2m lengths but can be cut to length

> Fix the product using rubber clips and screws which are provided in the pack

> The flexible strip can be cut at 16.5mm intervals (the strip can only be cut once)

> When a strip has been cut the end must be sealed using an end cap and silicone to maintain the IP integrity

Lumens: 244-280lm/ 383-440lm

Kelvin: 5000K (cool white LED)
            3000K (warm white LED)

> Width: 10mm

> Depth: 4mm

> 50,000 hours lamp life

Product FAQs
Product FAQs

What do I do when cutting the flexible strip?

The strip can be cut ONCE, there are marks on the strip which show where it can be cut (25mm intervals). When you cut the strip the cut end must be sealed with an end cap (SE300050) and silicone for the strip to retain its IP integrity.

If I cut the flexible strip will the wattage remain the same?

No, the wattage of the strip would be reduced by how much is cut off (how many LED's). For example if a 2m strip has a wattage of 15W and 1m is cut off the wattage of the 2m strip will reduce to 7.5W.

Downloads
Downloads
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver
close