SE20015W0.1

Compact

Compact Multi-Point LED Flexible Strip - 1000mm - Warm White

SE20015W0.1

Compact

Compact Multi-Point LED Flexible Strip - 1000mm - Warm White

 

RRP: £58.72 Offer: £29.36
Description

 

Ordering options
Ordering options
 CodeLED ColourStockOfferIn Stock QtyQty
SE20015W0.1Warm WhiteIn Stock£29.3650
 IDCodeLED ColourStockOfferIn Stock QtyQty
SE20015W0.1Warm WhiteIn Stock£29.3650
Product Features
Product Features
  • FinishWhite

    Hint

  • LED ColourWarm White

    Hint

    A soft tone with a yellow glow

    Read more
  • Beam Angle110°

    Hint

  • Dimmable*Dimmable

    Hint

    This light is dimmable via dimming controls from the Sensio range

only compatible with Sensio dimmer switchers/controls

Key points:

> A higher number of diodes per flexible strip means there are minimal dark spots. This provides a sleeker finish when used on a plinth in a kitchen with a glossy tiled floor or in an aluminium profile.

> Self-adhesive 3M tape backing allows for quick and simple installation.
> Male and female ends on the strip allow you to create the length required.
> The strip can be cut to length, scissor marks on the product mark where suitable to cut (every 65mm).
> Cut the strip ONCE and re-use the cut off piece using the mini-cut connector (SE90317HD).
> Use this product for a variety of applications (on the plinth, on the underside of the bed, above cabinets/wardrobes to up-light the ceiling to name a few).
> All you need to install is an adequate amount of flexible strips, driver connection lead(s) – one per run of strips and a LED driver.
> Run 10m from one 60W driver.
> 35,000 hours lamp life

Downloads
Downloads
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver
close