SE20005W0

Compact

Compact Multi-Point LED Flexible Strip -335mm- Warm White

SE20005W0

Compact

Compact Multi-Point LED Flexible Strip -335mm- Warm White

 

RRP: £22.37 Offer: £11.18
Description

 

Ordering options
Ordering options
 CodeLED ColourDriverColour TemperatureLengthLumensWattageStockOfferIn Stock QtyQty
SE20005W0Warm White
3000K335mm110Lm2WIn Stock£11.18189
 IDCodeLED ColourDriverColour TemperatureLengthLumensWattageStockOfferIn Stock QtyQty
SE20005W0Warm White
3000K335mm110Lm2WIn Stock£11.18189
Product Features
Product Features
  • FinishWhite

    Hint

  • LED ColourWarm White

    Hint

    A soft tone with a yellow glow

    Read more
  • Beam Angle110°

    Hint

  • Dimmable*Dimmable

    Hint

    This light is dimmable via dimming controls from the Sensio range

only compatible with Sensio dimmer switchers/controls

Key points:

> A higher number of diodes per flexible strip means there are minimal dark

spots. This provides a sleeker finish when used on a plinth in a kitchen with a
glossy tiled floor or in an aluminium profile.
> Self-adhesive 3M tape backing allows for quick and simple installation.
> Male and female ends on the strip allow you to create the length required.
> The strip can be cut to length, scissor marks on the product mark where
suitable to cut (every 65mm).
> Cut the strip ONCE and re-use the cut off piece using the mini-cut
connector (SE90317HD).
> Use this product for a variety of applications (on the plinth, on the underside
of the bed, above cabinets/wardrobes to up-light the ceiling to name a few).
> All you need to install is an adequate amount of flexible strips, driver
connection lead(s) – one per run of strips and a LED driver.
> Run 10m from one 60W driver.
> 35,000 hours lamp life

Product FAQs
Product FAQs

Can I run flexible strip lighting under a dishwasher?

The flexible strip itself cannot be run along/under the dishwasher, we supply extension cables for the flexible strips which would need to be interlinked and run around the back of the dishwasher to not break the run of strips.

Can our products be used with those of other manufacturers?

We have not tested this so therefore do not recommend it.

Downloads
Downloads
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver
close