SE30696C0.1

Kai

Kai-Slimline LED Mirror

SE30696C0.1

Kai

Kai-Slimline LED Mirror

 This mirror is rotation ready, so can be hung landscape or portrait. This adaptable mirror has 60 LED’s integrated and an extremely thin profile design.

Caution: To avoid interference, the sensor must be placed a minimum of 150mm away from any object/surface.

Recommended Location

Hint

LED Mirror

Read more
RRP: £219.19
Description

 This mirror is rotation ready, so can be hung landscape or portrait. This adaptable mirror has 60 LED’s integrated and an extremely thin profile design.

Caution: To avoid interference, the sensor must be placed a minimum of 150mm away from any object/surface.

Ordering options
Ordering options
 CodeLED ColourLumensSizeWattageWidthColour TemperatureHeightStockRRPIn Stock QtyQty
SE30696C0.1Cool White360700mm x 500mm4.2W500mm6000K700mmExpected 05/08/2021£219.190
 IDCodeLED ColourLumensSizeWattageWidthColour TemperatureHeightStockRRPIn Stock QtyQty
SE30696C0.1Cool White360700mm x 500mm4.2W500mm6000K700mmExpected 05/08/2021£219.190
Product Features
Product Features
  • SensorInfrared Sensor

    Hint

  • Demister PadDemister Pad

    Hint

  • IP RatingIP44

    Hint

  • Shaver SocketShaver Socket

    Hint

Key points:

 > IP44 Rated

> Infra Red Sensor

> Full size demister pad integrated for a steam free mirror

> Charging Socket

> 60 x cool white 0.07W LED’s

> High quality 5mm clear glass

> Requires 240V mains supply

> Suitable for use in zone 2 of the bathroom

> (W)500mm x (H)700mm x (D)55mm

Product FAQs
Product FAQs

Where is the power cable located?

The power cable is located in the centre of the back box of the mirror - in the top third.

Where is the IR sensor located?

The IR sensor is located underneath the bottom of the mirror to the right hand side.

How do I activate my lights?

Simply swipe your hand within 5cm of the infra-red sensor located on the underside of your mirror to switch the lights on. Swipe your hand past the sensor once more to switch the lights off.

Can our products be used with those of other manufacturers?

We have not tested this so therefore do not recommend it.

See more FAQs (2)
Downloads
Downloads
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver
close