SE2015000

PIR Sensor Switch

SE2015000

PIR Sensor Switch

The PIR sensor switch is for use inside a cabinet or wardrobe. The large detection range means the sensor can be positioned at the back of the cabinet if required.

Recommended Location

RRP: £33.44
Description

The PIR sensor switch is for use inside a cabinet or wardrobe. The large detection range means the sensor can be positioned at the back of the cabinet if required.

Ordering options
Ordering options
 CodeDriverWattageStockRRPQty
SE2015000
1.25WIn Stock£33.44
 IDCodeDriverWattageStockRRPQty
SE2015000
1.25WIn Stock£33.44
CodeDescriptionStockColour CodingRRPQty
SE40525 Sensio LED 15W 12V Driver with 6 Port LED Block InStock
£22.68
SE40526 Sensio LED 30W 12V Driver with 12 Port LED Block InStock
£39.84
SE40548 Ultra Slim line 12V 30W driver InStock
£45.00
SE40553 Sensio LED 6W 24V Driver with 4 Port LED Block InStock
£17.40
SE40555 Sensio LED 24V 15W Driver with 6 port LED Block InStock
£23.04
SE40556 Sensio LED 24V 30W Driver with 12 port LED Block InStock
£37.68
SE40557.1 LED 24V 60W Driver with 12 port LED block InStock
£59.40
SE40599 30W Dimmable Driver with 12 Port JB4 Distributor InStock
£52.20
SE40625 Sensio LED 6W 12V Driver with 4 Port LED Block InStock
£16.68
CodeDescriptionStockColour CodingRRPQty
Product Features
Product Features
  • FinishAluminium

    Hint

  • Cable Length1.5 metres

    Hint

Key points:

> Suitable to be used with 12V or 24V products without an integrated sensor.

> Works as an on/off switch for lighting installed inside cabinets or wardrobes. Mount in a side panel or back panel of an internal unit.

> Small and discreet product.

> Sensor has a 1.5m cable to the sensor, a 300mm cable with JB4 plug to connect to the driver and a 4 port JB4 distribution block for light connection.

> A dial on the front of the sensor unit allows you to select the time delay on the sensor (from 10 seconds to 3 minutes).

> 80 ° detection angle.

> 0.5m - 2.5m detection range.

> Can be used in kitchens or bedrooms.

> Requires a 20mm hole-cut

Downloads
Downloads
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver
close