Recommended Location

Description

Ordering options
Product Features
Product Features
  • FinishWhite

    Hint

  • LED ColourCool & Warm White

    Hint

    This fitting is available in either cool white or warm white LED

    Read more
  • Beam Angle120°

    Hint

  • Dimmable*Dimmable

    Hint

    This light is dimmable via dimming controls from the Sensio range

  • DriverGreen 24V

    Hint

  • IP RatingIP54

    Hint

only compatible with Sensio dimmer switchers/controls

Key points:

Product FAQs
Product FAQs

Can the cable on this fitting be extended?

Yes. We offer a 2.5m extension cable (SE9009). Please see the accessory listing below.

Can I run flexible strip lighting under a dishwasher?

The flexible strip itself cannot be run along/under the dishwasher, we supply extension cables for the flexible strips which would need to be interlinked and run around the back of the dishwasher to not break the run of strips.

Can I bend the flexible strip on a corner?

No, the flexible strip cannot be bent on a corner, to get around corners you should use the 50mm corner connection cable.

If I cut the flexible strip will the wattage remain the same?

No, the wattage of the strip would be reduced by how much is cut off (how many LED's). For example if a 2m strip has a wattage of 15W and 1m is cut off the wattage of the 2m strip will reduce to 7.5W.

One end of the flexible strip appears to be blank.

The male end of every flexible strip is supplied with an end cap covering the pins to protect them. For interlinking and connecting to the driver connection cable this end cap must be removed.

How do you connect them - do you need a connection cable?

You connect them by pushing them together. You do not need a connection cable.

Can our products be used with those of other manufacturers?

We have not tested this so therefore do not recommend it.

Can I use a wall dimmer (not a Sensio product)?

We have not tested whether our products are compatible with other dimmers, therefore we recommend using our dimmers/switches.

See more FAQs (6)
Downloads
Downloads
Accessories
Accessories
SE9009
RRP: £3.00
Quantity
Quantity
SE90317HD
RRP: £1.44
Quantity
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver
close