SE10166C0

SLS

SLS Lara Recess/Surface Light

SLS (Surface Light Source) is the latest in LED technology, with a higher light output and no visible LED's, they produce a diffused light, similar to the look of a halogen or fluorescent light. The sleek SLS Recess/Surface light is sure to be a welcome addition to your kitchen.

Recommended Location

Hint

Spot lighting creates a coned lighting effect, perfect for both traditional and contemporary kitchens

Read more
From: £26.64
Where to Buy
Ordering options
 CodeColour TemperatureDriverLED ColourLumensPack QtyWattage
SE10166C05000K
Cool White216Lm13W
SE10166C25000KIncluded in pack Cool White216Lm26W
SE10166C35000KIncluded in pack Cool White216Lm39W
SE10166W03000K
Warm White194Lm13W
SE10166W23000KIncluded in pack Warm White194Lm26W
SE10166W33000KIncluded in pack Warm White194Lm39W

CodeDescriptionColour Coding
SE40553 6W Driver with 4 Port JB4 Distribution Block
SE40555 15W LED Driver with 6 Port JB4 Distributor
SE40556 30W LED Driver with 12 Port JB4 Distributor

Product Features
  • FinishAluminium

    Hint

  • LED ColourCool & Warm White

    Hint

    This fitting is available in either cool white or warm white LED

    Read more
  • Lamp Life13 years

    Hint

  • Beam Angle105°

    Hint

  • DimmableDimmable

    Hint

    This light is dimmable via dimming controls from the Sensio range

  • Quantity of lights2 per m

    Hint

    For each metre of cabinetry we would recommend using 2 of these lights

    Read more
  • Cable Length1.5 metres

    Hint

Key points:

> Surface Light Source (SLS) products are LED fittings with no visible LED points.

> This fitting has a luminous efficiacy of 72 lm/W, making it over 35% brighter than others on the market*.

> Currently the brightest Sensio low voltage LED surface/recess light.

> Available in both cool white and warm white LED, choose the option which will work best with your work surface and kitchen style.

> Use as task lighting under cabinets or to illuminate cabinet interiors in glass fronted wall units.

> Spacer included, fitting can be surface mounted or recessed.

> Long lamp life - lasts up to 11.5 years more than halogen.

> Switch from halogen and see significant savings on your enegy bills.

> Why this SLS spot light? The aluminium of this fitting has good thermal conduction, which in turn creates over double the light output than a steel SLS fitting.

* Luminous efficacy information is correct the time of publishing

Product FAQs

Can the cable on this fitting be extended?

Yes. We offer a 2.5m extension cable (SE9009). Please see the accessory listing below.

Why are my lights flashing?

This can be caused by one of many things; 1. The lights are running from a driver of an incorrect voltage. 2. The fitting has been wired to an incompatible dimmer. 3. You have overloaded your LED driver. Please calculate the wattage of the connected lights and ensure this does not exceed the total wattage allowance of the connected driver.

Downloads
Accessories
SE40520
From: £17.76
SE9009
From: £2.64
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver