SE11010SSCW

Genus

Genus LED Triangle Light

First generation LED. The Genus was the first LED under cabinet light range, introduced almost 7 years ago, this product remains popular. Over the years the LED technology in the fitting has been upgraded, however this product is still a cost effective favourite.

Recommended Location

Hint

Spot lighting creates a coned lighting effect, perfect for both traditional and contemporary kitchens

Read more
From: £14.88
Where to Buy
Ordering options
 CodeColour TemperatureDriverLED ColourLumensPack QtyWattage
SE11010SSCW5750K
Cool White95 lm11.1W
SE11010SSCWK25750KIncluded in pack Cool White95 lm22.2W
SE11010SSCWK35750KIncluded in pack Cool White95 lm33.3W

CodeDescriptionColour Coding
SE40525 15W LED Driver with 6 Port JB4 Distributor
SE40526 30W LED Driver with 12 Port JB4 Distributor
SE40625 6W LED Driver with 4 Port JB4 Distributor

Product Features
  • FinishStainless Steel

    Hint

  • LED ColourCool White

    Hint

    Cool white LED provides the brightest light, perfect for internal lighting or task lighting in a modern setting

    Read more
  • Lamp Life11 years

    Hint

  • Beam Angle120°

    Hint

  • DimmableDimmable

    Hint

    This light is dimmable via dimming controls from the Sensio range

  • Quantity of lights2 per m

    Hint

    For each metre of cabinetry we would recommend using 2 of these lights

    Read more
  • Cable Length1.5 metres

    Hint

Key points:

> Stainless steel triangle light with standard SMD LED chips.

> The LED lamp in this fitting lasts 9.5 years longer than a halogen lamp (on average). Save energy and money by switching to LED lighting.

> Energy saving, each fitting runs at only 1.1W.

> Stainless steel finish and cool white LED, perfect for contemporary kitchen designs.

> The angled aspect of a triangle light fitting means the light is directed forward onto the worktop.

> The centre of the fitting containing the LED’s simply pops out so can be replaced down the line if required.

> Compatible with Sensio sensors and controllers.
 

Product FAQs

Can the LED lamp be replaced or do I need to replace the full fitting?

Purchase a LED recess/surface light and replace the inner LED part of the fitting.

Can the cable on this fitting be extended?

Yes. We offer a 2.5m extension cable (SE9009). Please see the accessory listing below.

Why are my lights flashing?

This can be caused by one of many things; 1. The lights are running from a driver of an incorrect voltage. 2. The fitting has been wired to an incompatible dimmer. 3. You have overloaded your LED driver. Please calculate the wattage of the connected lights and ensure this does not exceed the total wattage allowance of the connected driver.

See more FAQs (1)
Downloads
Accessories
SE9009
From: £2.64
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver