Genus LED Surface Light With Adaptor Cable

First generation LED. The Genus was the first LED under cabinet light range, introduced almost 7 years ago, this product remains popular. Over the years the LED technology in the fitting has been upgraded to ensure the brightness and colour temperature are at the perfect level.

Recommended Location


Spot lighting creates a coned lighting effect, perfect for both traditional and contemporary kitchens

Read more
From: £12.60
Where to Buy
Ordering options
 CodeColour TemperatureDriverLED ColourLumensPack QtyWattage
Cool White95 lm11.1W
SE11025SSCWK25750KIncluded in pack Cool White95 lm22.2W
SE11025SSCWK35750KIncluded in pack Cool White95 lm33.3W
Warm White95 lm11.1W

CodeDescriptionColour Coding
SE40525 15W LED Driver with 6 Port JB4 Distributor
SE40526 30W LED Driver with 12 Port JB4 Distributor
SE40625 6W LED Driver with 4 Port JB4 Distributor

Product Features
  • FinishStainless Steel


  • LED ColourCool & Warm White


    This fitting is available in either cool white or warm white LED

    Read more
  • Lamp Life15 years


    LED lasts over 13 times longer than Halogen.

    Read more
  • Beam Angle120°


  • DimmableDimmable


    This light is dimmable via dimming controls from the Sensio range

  • Quantity of lights2 per m


    For each metre of cabinetry we would recommend using 2 of these lights

    Read more
  • Cable Length1.5 metres


Key points:

> Stainless steel recessed/surface light with standard SMD LED chips.

> The fitting comes with the collar, however this can be removed if you wish to recess the fitting (cut-out size 55mm)

> Extremely long lamp life of up to 15 years (on the upgraded product).

> Energy saving, each fitting runs at only 1.1W.

> Stainless steel finish, perfect for both modern or traditional kitchens.

> Choose from cool white or warm white LED to best augment your work surface.

> The centre of the fitting containing the LED’s simply pops out so can be replaced down the line if required.

> This range is being upgraded to give you the very best light output, longest lifespan and neatest appearance for your money.

Product FAQs

Can the LED lamp be replaced or do I need to replace the full fitting?

Purchase a LED recess/surface light and replace the inner LED part of the fitting.

Can the cable on this fitting be extended?

Yes. We offer a 2.5m extension cable (SE9009). Please see the accessory listing below.

Why are my lights flashing?

This can be caused by one of many things; 1. The lights are running from a driver of an incorrect voltage. 2. The fitting has been wired to an incompatible dimmer. 3. You have overloaded your LED driver. Please calculate the wattage of the connected lights and ensure this does not exceed the total wattage allowance of the connected driver.

See more FAQs (1)
From: £17.76
From: £2.64

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.


Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded: