GX53 Circa

GX53 LED Recess/Surface Light

GX53 products can be connected directly to the mains supply so are extremely simple to install. These fittings are the brightest of the LED spot lights as the lamp contains 50 LED's.

Recommended Location


Spot lighting creates a coned lighting effect, perfect for both traditional and contemporary kitchens

Read more
From: £34.44
Where to Buy
Ordering options
 CodeColour TemperatureDescriptionLED ColourLumensWattage
SE10151CW5800KGX53 Lamp and Round FittingCool White250Lm2.8W
SE10151WW3000KGX53 Lamp and Round FittingWarm White245Lm2.8W
SE11146SS GX53 Round Fitting Only   

Product Features
  • FinishStainless Steel


  • LED ColourCool & Warm White


    This fitting is available in either cool white or warm white LED

    Read more
  • Lamp Life13 years


  • Beam Angle120°


  • Quantity of lights2 per m


    For each metre of cabinetry we would recommend using 2 of these lights

    Read more
  • Cable Length1.5 metres


Key points:

> Stainless steel surface light with a 50 diode GX53 lamp
> The collar can be removed from the fitting if you wish to recess
> This fitting runs at 240V so no driver is required
> Extremely simple connection system, the mains cable has a connector attached which plugs into the SE11175. When this accessory is used these fittings can be installed by anyone
> 50 diodes integrated for optimum light output
> The lamps are simple to replace via a simple twist and lock mechanism

From: £21.12
From: £3.84

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.


Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded: