Argo HD LED Surface Light - Aluminium

A simple solution to create a stunning look. The recess/surface light is very versatile, it can be either recess or surface mounted under a cabinet to illuminate the worktop or used inside a wall unit. Use in a glass fronted cabinet to create a subtle mood light or use with a door sensor inside a wall unit so the light comes on as the door opens and switches off as the door closes.

Recommended Location


Spot lighting creates a coned lighting effect, perfect for both traditional and contemporary kitchens

Read more
From: £22.32
Where to Buy
Ordering options
 CodeColour TemperatureDriverLED ColourLumensPack QtyWattage
Cool White132 lm11.65W
SE9005HDCWK25000KIncluded in pack Cool White132 lm23.3W
SE9005HDCWK35000KIncluded in pack Cool White132 lm34.95W
Warm White132 lm 1.65W
SE9005HDWWK23000KIncluded in pack Warm White123 lm23.3W
SE9005HDWWK33000KIncluded in pack Warm White123 lm34.95W

CodeDescriptionColour Coding
SE40553 6W Driver with 4 Port JB4 Distribution Block
SE40555 15W LED Driver with 6 Port JB4 Distributor
SE40556 30W LED Driver with 12 Port JB4 Distributor
SE40557.1 LED 24V 60W Driver with 12 port LED block

Product Features
  • FinishAluminium


  • LED ColourCool & Warm White


    This fitting is available in either cool white or warm white LED

    Read more
  • Lamp Life18.5 years


  • Beam Angle50


  • DimmableDimmable


    This light is dimmable via dimming controls from the Sensio range

  • Quantity of lights2 per m


    For each metre of cabinetry we would recommend using 2 of these lights

    Read more
  • Cable Length2.5 metres


  • DriverGreen 24V


Key points:

> The fitting is supplied with the collar, can be either surface or recess mounted.

> A range of finishes available in cool and warm white LED. Be sure to find the perfect spot light for your kitchen from this popular range.

> This fitting has a luminous efficiacy of 80 lm/W, making it almost 30% brighter than equivalent products on the market*.

> High definition LED – a lens over each diode intensifies the light output.

> Use as task lighting under cabinets or to illuminate cabinet interiors in glass fronted wall units.

> Over 90% less energy used when comparing to halogen. Save money on electricity bills when switching from halogen to HD LED.

> Long lamp life - lasts up to 17 years more than halogen.

> Fittings are complete with the Sensio cable connect system.

> Can be used with the range of Sensio switches and dimmers.

Product FAQs

Is this fitting as bright as halogen?

Yes, the light output from this fitting is comparable to a halogen light. When using halogen lighting much of the energy is wasted due to heat and light dispersion.

Can the cable on this fitting be extended?

Yes. We offer a 2.5m extension cable (SE9009). Please see the accessory listing below.

Why are my lights flashing?

This can be caused by one of many things; 1. The lights are running from a driver of an incorrect voltage. 2. The fitting has been wired to an incompatible dimmer. 3. You have overloaded your LED driver. Please calculate the wattage of the connected lights and ensure this does not exceed the total wattage allowance of the connected driver.

See more FAQs (1)
From: £2.64

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.


Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded: