Basket Icon 0
There are no item(s) in the basket.
SE40515

In-Cabinet PIR Sensor Switch

SE40515

In-Cabinet PIR Sensor Switch

The PIR sensor switch is for use inside a cabinet or wardrobe. Wire this sensor to the internal lights and as the door opens the sensor will detect the movement and switch all connected lights on. The detection range of this product is 0.5-2.5m meaning it can be mounted as required in the cabinet or wardrobe.

Recommended Location

RRP: £29.64
Description

The PIR sensor switch is for use inside a cabinet or wardrobe. Wire this sensor to the internal lights and as the door opens the sensor will detect the movement and switch all connected lights on. The detection range of this product is 0.5-2.5m meaning it can be mounted as required in the cabinet or wardrobe.

Ordering options
Ordering options
 CodeDetection RangeMax. WattageStockRRPQty
SE405150.5-2.5m250WIn Stock£29.64
 IDCodeDetection RangeMax. WattageStockRRPQty
SE405150.5-2.5m250WIn Stock£29.64
Product Features
Product Features
  • FinishAluminium

    Hint

  • Cable Length1.5 metres

    Hint

Key points:

> Discreet in-cabinet motion sensor switch.

> Works as on/off switch for lighting installed inside cabinets or wardrobes.

> Mount in a side panel or back panel of an internal unit.

> Dial on front of sensor allows you to select how long the lights will stay on for (from 10 seconds to 3 minutes).

> Detection range - 0.5m-2.5m.

> 80° detection angle.

> Discreet fitting.

> Does not require a JB4 connector.

> Compatible with 12V, 24V & 240V products.

> Silver finish.

Downloads
Downloads
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver
close