Basket Icon 0
There are no item(s) in the basket.
SE40553

6W Driver with 4 Port JB4 Distribution Block

SE40553

6W Driver with 4 Port JB4 Distribution Block

Use this driver with any GREEN colour coded products. The 6W driver is ideal if you have a small number of low wattage under cabinet lights.

This electronic LED converter is exclusively designed for LED products which are to be used indoors. The electronic converter has a switch mode power supply with 24VDC constant output voltage.

An electronic protection circuit switches off the electronic converter in case of short circuit or overload in the secondary circuit, overheat as well as open circuit.

Recommended Location

RRP: £17.40
Description

Use this driver with any GREEN colour coded products. The 6W driver is ideal if you have a small number of low wattage under cabinet lights.

This electronic LED converter is exclusively designed for LED products which are to be used indoors. The electronic converter has a switch mode power supply with 24VDC constant output voltage.

An electronic protection circuit switches off the electronic converter in case of short circuit or overload in the secondary circuit, overheat as well as open circuit.

Ordering options
Ordering options
 CodeDriverWattageStockRRPQty
SE40553
6WIn Stock£17.40
 IDCodeDriverWattageStockRRPQty
SE40553
6WIn Stock£17.40
CodeDescriptionStockColour CodingRRPQty
SE40553 6W Driver with 4 Port JB4 Distribution Block InStock
£17.40
SE40555 15W LED Driver with 6 Port JB4 Distributor InStock
£23.04
SE40556 30W LED Driver with 12 Port JB4 Distributor InStock
£37.68
SE40557.1 LED 24V 60W Driver with 12 port LED block Expected 06/12/2018
£59.40
CodeDescriptionStockColour CodingRRPQty
SE40553 6W Driver with 4 Port JB4 Distribution Block InStock
£17.40
SE40555 15W LED Driver with 6 Port JB4 Distributor InStock
£23.04
SE40556 30W LED Driver with 12 Port JB4 Distributor InStock
£37.68
SE40557.1 LED 24V 60W Driver with 12 port LED block Expected 06/12/2018
£59.40
Product Features
Product Features
  • Cable Length1.5 metres

    Hint

Key points:

  • The converter only be used for LED lamp only, pay attention to the polarity of LED, wrong polarity may damage LED.
  • The converter is only for indoor use and permissible operatingtemperature is -20 to +50 degrees celcius
  • With terminal cover and cable clamp, the converter can beindependent installed.
  • The indicated load should not be exceeded.
  • For 24VDC LED lamp, max 300mA or 7.2W.
  • For 1W (350mA) high power LED, 6 x 1W LED

Specifications:

Maximum load: 6W
Minimum load: 0.5W
IP rating: IP20
Ta:-20~+50 degrees celcius
Tc: 80 degrees celcius

Dimensions:
Length: 52mm
Width: 34mm
Depth: 20mm

Product FAQs
Product FAQs

What is the length of the cable between the driver and the distribution block?

140mm

Can our products be used with those of other manufacturers?

We have not tested this so therefore do not recommend it.

Downloads
Downloads
Accessories
Accessories
Quantity
Quantity
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver
close