Basket Icon 0
There are no item(s) in the basket.
SE40525

15W LED Driver with 6 Port JB4 Distributor

SE40525

15W LED Driver with 6 Port JB4 Distributor

Use this driver with ORANGE colour coded products from the Sensio range.

This electronic LED converter is exclusively designed for LED products which are to be used indoors. The electronic converter has a switch mode power supply with 12VDC constant output voltage.

An electronic protection circuit switches off the electronic converter in case of short circuit or overload in the secondary circuit, overheat as well as open circuit. This convertor is a thermally protected device, the type of protection is automatic reset. Once the load is reduced to sit within the suggested parameter the LED converter is ready for operation again.

Recommended Location

RRP: £22.68
Description

Use this driver with ORANGE colour coded products from the Sensio range.

This electronic LED converter is exclusively designed for LED products which are to be used indoors. The electronic converter has a switch mode power supply with 12VDC constant output voltage.

An electronic protection circuit switches off the electronic converter in case of short circuit or overload in the secondary circuit, overheat as well as open circuit. This convertor is a thermally protected device, the type of protection is automatic reset. Once the load is reduced to sit within the suggested parameter the LED converter is ready for operation again.

Ordering options
Ordering options
 CodeDriverWattageStockRRPQty
SE40525
15WIn Stock£22.68
 IDCodeDriverWattageStockRRPQty
SE40525
15WIn Stock£22.68
CodeDescriptionStockColour CodingRRPQty
SE40525 15W LED Driver with 6 Port JB4 Distributor InStock
£22.68
SE40526 30W LED Driver with 12 Port JB4 Distributor InStock
£39.84
SE40625 6W LED Driver with 4 Port JB4 Distributor Expected 20/12/2018
£16.68
CodeDescriptionStockColour CodingRRPQty
SE40525 15W LED Driver with 6 Port JB4 Distributor InStock
£22.68
SE40526 30W LED Driver with 12 Port JB4 Distributor InStock
£39.84
SE40625 6W LED Driver with 4 Port JB4 Distributor Expected 20/12/2018
£16.68
Product Features
Product Features
  • Cable Length1.5 metres

    Hint

Key points:

Important information for the installation:
The unit conforms to the directive 2004/108/EC for the electromagnetic compatibility and the low voltage directive 2006/108/EC.


  • The electronic converter can only be used with the LED lamps.
  • The electronic converter is only suitable for use in indoors. Protect the electronic converter against excessive heat (permissible operating temperature range –20 to +40 degrees celcius).
  • The loads indicated on the converter must neither exceed nor below the following values: 0.5-15W.
  • Connect the LED lamps to the electronic LED converter with correct polarity according to the schematic drawing.
  • The maximum length of the output cable to the LED lamps should not exceed 8m in order to meet the EMC standard.
  • If the electronic LED converter is used for purposes other than originally intended or it is connected in the wrong way, no liability can be taken over for possible damages.


Specifications:


Input voltage: 220-240V~ 50Hz
Output voltage: 12VDC +1V/-0.2V
Rated power: 15W
Minimum load: 0.5W
Protection degree: IP20

Dimensions:


Length: 120mm
Width: 45mm
Depth: 20mm

Product FAQs
Product FAQs

What is the length of the cable between the driver and the distribution block?

140mm

Can our products be used with those of other manufacturers?

We have not tested this so therefore do not recommend it.

Downloads
Downloads
Accessories
Accessories
Quantity
Quantity
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver
close