SE9080HDCW

Picca

Picca In Cabinet Light With IR Sensor

Angled fitting, mount at the front of the inside of the cabinet to flood light back in. Really make the most of your cabinet interior with this neat fitting, available in 2 lengths.

Recommended Location

Hint

Add an element of convenience to your kitchen. Illuminate cabinet interiors as the door is opened

Read more
From: £42.24
Where to Buy
Ordering options
 CodeColour TemperatureDriverLED ColourLengthLumensSensorWattage
SE9080HDCW5000K
Cool White430mm77 lmYes2W

CodeDescriptionColour Coding
SE40553 6W Driver with 4 Port JB4 Distribution Block
SE40555 15W LED Driver with 6 Port JB4 Distributor
SE40556 30W LED Driver with 12 Port JB4 Distributor
SE40557.1 LED 24V 60W Driver with 12 port LED block

Product Features
  • FinishAluminium

    Hint

  • LED ColourCool & Warm White

    Hint

    This fitting is available in either cool white or warm white LED

    Read more
  • Beam Angle70°

    Hint

  • Cable Length1.5 metres

    Hint

Key points:


> Integrated IR sensor on the front edge of the fitting, for on/off switching activated by the opening and closing of the cabinet door
 
> The light floods to the back of the cabinet for optimum illumination
 
> Cool white for maximum illumination, warm white for wooden carcasses
 
> High Definition LED’s integrated
 
> Low wattage fittings – minimal energy usage
 

Product FAQs

Can the cable on this fitting be extended?

Yes. We offer a 2.5m extension cable (SE9009). Please see the accessory listing below.

Downloads
Accessories
SE9009
From: £2.64
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver