Rechargeable Wardrobe/In Cabinet Light

The Mimas is a rechargeable battery operated fitting. There is no wiring required so this product is perfect for retrofitting and anyone can install. Suitable for use inside cabinets or wardrobes.

Recommended Location


Add an element of convenience to your kitchen. Illuminate cabinet interiors as the door is opened

Read more
From: £51.00
Where to Buy
Ordering options
 CodeColour TemperatureLED ColourLumensPack QtyWattage
SE20051C04500KCool White52Lm10.7W

Product Features
  • FinishAluminium


  • LED ColourCool White


    Cool white LED provides the brightest light, perfect for internal lighting or task lighting in a modern setting

    Read more
  • Beam Angle120°


  • Colour Temperature4500K


    A natural white/daylight tone

    Read more
  • BatteryRechargeable


    Contains a lithium-ion battery. Rechargeable via a pluggable USB charger

    Read more
Key points:

> Contains a rechargeable Lithium-ion battery. No electrical installation required
> The product is cable free for ease of installation
> Features an integrated PIR sensor which automatically switches the light on when the wardrobe/cabinet door is opened
> If movement is not detected for 30 seconds or more the light will temporarily switch off to reduce wastage of the battery power
> The PIR has a detection range of 2m, allowing you to place the fitting where you require in the wardrobe/cabinet
> The run time of the product is 8 months based on 2.5 minutes of use per day. The charging time is 6.5 hours on average
> Recharge the unit using the pluggable USB charger
> The product has an additional on/off switch for optional use

> Suitable for use in a wardrobe, kitchen cabinet or bathroom cabinet.

Product FAQs

Will the brightness of the fitting reduce after so long?

No, the brightness of the product remains the same throughout it's lifespan, however the fitting will need to be recharged more frequently after the product has been charged 500 times.

What is the lifespan of the LED's in this fitting?

The SMD LED's in this fitting have a lifespan of 30,000 working hours.

From: £11.76

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.


Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded: