Basket Icon 0
There are no item(s) in the basket.
SE40516.1

Cannon Cabinet/Swipe Sensor Switch

SE40516.1

Cannon Cabinet/Swipe Sensor Switch

This attractive IR sensor has 3 functions; use under cabinets as a swipe on/off switch or to dim the connected lights. Alternatively, mount inside a kitchen cabinet or wardrobe to act as a door sensor to internal lights.

Please note this .1 code product has been upgraded to now include a dimming function and to accommodate products with higher wattages.

Recommended Location

RRP: £20.16
Description

This attractive IR sensor has 3 functions; use under cabinets as a swipe on/off switch or to dim the connected lights. Alternatively, mount inside a kitchen cabinet or wardrobe to act as a door sensor to internal lights.

Please note this .1 code product has been upgraded to now include a dimming function and to accommodate products with higher wattages.

Ordering options
Ordering options
 CodeDriverSensorStockRRPQty
SE40516.1
YesIn Stock£20.16
 IDCodeDriverSensorStockRRPQty
SE40516.1
YesIn Stock£20.16
CodeDescriptionStockColour CodingRRPQty
SE40525 15W LED Driver with 6 Port JB4 Distributor InStock
£22.68
SE40526 30W LED Driver with 12 Port JB4 Distributor InStock
£39.84
SE40553 6W Driver with 4 Port JB4 Distribution Block InStock
£17.40
SE40555 15W LED Driver with 6 Port JB4 Distributor InStock
£23.04
SE40556 30W LED Driver with 12 Port JB4 Distributor InStock
£37.68
SE40557.1 LED 24V 60W Driver with 12 port LED block InStock
£59.40
SE40625 6W LED Driver with 4 Port JB4 Distributor InStock
£16.68
CodeDescriptionStockColour CodingRRPQty
SE40525 15W LED Driver with 6 Port JB4 Distributor InStock
£22.68
SE40526 30W LED Driver with 12 Port JB4 Distributor InStock
£39.84
SE40553 6W Driver with 4 Port JB4 Distribution Block InStock
£17.40
SE40555 15W LED Driver with 6 Port JB4 Distributor InStock
£23.04
SE40556 30W LED Driver with 12 Port JB4 Distributor InStock
£37.68
SE40557.1 LED 24V 60W Driver with 12 port LED block InStock
£59.40
SE40625 6W LED Driver with 4 Port JB4 Distributor InStock
£16.68
Product Features
Product Features
  • Cable Length2.5 metres

    Hint

Key points:

 > Activates and dims lights with motion.

Three functions:

> Mount inside a cabinet - open door to activate light.

> Mount under cabinet - swipe hand in detection range to activate light. Dimming function is available in this mode.
.
> Mount under cabinet - dim the lights when hand is held under the sensor for more than 1 second.

> 5cm detection range.

> Plug and play solution.

> Can be surface mounted or recessed.

> Pre-set to monostable function.

> 1 x JB4 Distribution Block supplied with each sensor.

> 2.5m cable from Sensor to Distribution Block.

> Works with any 12V or 24V product.

> Silver finish.

Downloads
Downloads
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver
close