SE10005R0

RGB

RGB Flexible LED Strip

The flexible strip which offers endless design possibilities, inject some fun with the RGB flexible strip light. Control multiple runs of the product from a single remote control.

We recommend that you consult a qualified electrician to outline your requirements and install the product.
These products require a driver connection cable and LED driver to run. Please order in a kit format or select the required components below.

If in doubt please speak to an electrician or contact our Customer Service Team. 

Recommended Location

Hint

Create a relaxing atmosphere by adding flexible strip lighting beneath the bed and above wardrobes

From: £12.10
Where to Buy
Ordering options
 CodeDriverLED ColourLengthWattage
SE10005R0
RGB330mm1.8W
SE10025R0
RGB2m10W

CodeDescriptionColour Coding
SE40553 6W Driver with 4 Port JB4 Distribution Block
SE40555 15W LED Driver with 6 Port JB4 Distributor
SE40556 30W LED Driver with 12 Port JB4 Distributor

Product Features
  • FinishWhite

    Hint

  • LED ColourRGB

    Hint

    7 pre-set colours. Set to one colour or select a colour changing option to create stunning lighting effects

    Read more
  • Lamp Life18.5 years

    Hint

  • Beam Angle120°

    Hint

  • DimmableDimmable

    Hint

    This light is dimmable via dimming controls from the Sensio range

Key points:

> Self-adhesive 3M tape backing allows for quick and simple installation.

> 7 preset colours of the RGB (cool white, violet, yellow, cyan, green, red and blue).

> The perfect product to create mood lighting, either set to one of the 7 colours, or select the slow or rapid colour change option.

> Male and female ends on the strip allow you to create the length required.

> The strip can be cut to length, scissor marks on the product mark where suitable to cut (every 162mm).

> Use the RGB remote control to create the effect or choose the colour that is perfect for you at the touch of a dial.

> All you need to install is an adequate amount of flexible strips, driver connection lead(s) – one per run of strips, driver and a RGB control.

> Run a maximum length of 10m from one driver.

> When using the RGB remote control, each new run of RGB strip lighting requires a driver and a receiver, however multiple receivers can now be controlled via one remote control.

> We have upgraded this range from 12V to 24V to allow multiple receivers to be controlled from a single remote control.

Product FAQs

What is the lumen value of the cool white option?

180lm

Downloads
Accessories
SE10327
From: £2.64
SE10328
From: £2.88
SE791090
From: £39.00
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver