SE1003000

DuoFlex

Duo Flex Remote Control

Control the DuoFlex Flexible LED Strip Lights with this remote control. A single remote control can be paired with several receivers meaning you can have the DuoFlex in several area's of the kitchen or bedroom and control all from this one remote control.

Please note: The remote control and receiver(s) are purchased separately (see product table below). A receiver is required for each driver you have.

Recommended Location

Hint

Create a relaxing atmosphere by adding flexible strip lighting beneath the bed and above wardrobes

From: £24.70
Where to Buy
Ordering options
 CodeDriver
SE1003000

CodeDescriptionColour Coding
SE40553 6W Driver with 4 Port JB4 Distribution Block
SE40555 15W LED Driver with 6 Port JB4 Distributor
SE40556 30W LED Driver with 12 Port JB4 Distributor

Product Features
  • FinishWhite

    Hint

Key points:

> The DuoFlex remote control allows you to choose from both cool white and warm white LED, or to create a natural white tone by mixing the two colours

> One remote can control mutliple receivers, allowing you to control DuoFlex located in different areas of the kitchen

> Functions of the DuoFlex remote control:

- Rotate the colour temperature wheel to select the desired colour temperature
- Decrease the brightness level of the DuoFlex strips (in 10% increments)
- Increase the brightness level of the DuoFlex strips (in 10% increments)
- On/off – switch the connected fittings on/off
- Memory function of the last setting before switched off
- Radio Signal - the maximum range of the remote control is 15m

> A DuoFlex receiver (SE1004100) is required for every driver you have

> The maximum wattage per receiver is 22.5W, so a maximum length of 6m of the DuoFlex can be run from each driver/receiver

Product FAQs

Can the DuoFlex Remote be used to control other lights?

No, at the moment the DuoFlex remote control can only control the DuoFlex Dual Colour Flexible LED Strip Light.

Does the controller have a maximum wattage?

No it doesn't. Only the driver and receivers have a maximum wattage allowance.

Does 'boxing in' the receiver affect the detection range of the remote control?

It depends on the material which the receiver is positioned behind. Wood for example does not affect the detection range, however metal will reduce the detection range to a degree. The detection range will also be affected if enclosed within a wall.

See more FAQs (1)
Downloads
Accessories
SE10011D0
From: £46.68
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver