DuoFlex Dual Colour Flexible Strip

Seamlessly mix colour to create the perfect mood.

Recommended Location


Create a relaxing atmosphere by adding flexible strip lighting beneath the bed and above wardrobes

From: £46.68
Where to Buy
Ordering options
 CodeColour TemperatureControllerDriverDriver WattageLED ColourLengthLumensPack QtyWattage
 Cool & Warm White1m282-300Lm 3.75W
 Cool & Warm White2m282-300Lm 7.5W
SE10053D12700-5000KInline SwitchIncluded in pack 30WCool & Warm White2m282-300Lm17.5W
SE10073D12700-5000KRemote & ReceiverIncluded in pack 30WCool & Warm White2m282-300Lm17.5W

CodeDescriptionColour Coding
SE40553 6W Driver with 4 Port JB4 Distribution Block
SE40555 15W LED Driver with 6 Port JB4 Distributor
SE40556 30W LED Driver with 12 Port JB4 Distributor

Product Features
  • FinishWhite


  • LED ColourCool White, Natural White & Warm White


    Cool & warm white diodes integrated, seamlessly mix the colours to create the perfect mood

    Read more
  • Lamp Life13 years


  • Beam Angle120°


  • DimmableDimmable


    This light is dimmable via dimming controls from the Sensio range

Key points:

> The DuoFlex brings real flexibility to the flexible strip light range. With only one flexible strip the LED colour can be set from warm white through the full spectrum to cool white.

> Self-adhesive 3M backing allows for quick and simple installation.

> Male and female ends on the strip allow you to create the length required.

> The strip can be cut to length, scissor marks on the product mark where it is suitable to cut (every 165mm).

> Operate using a remote control or inline switch. One remote will control all receivers within a 15m radius.

> A maximum length of 6m of the DuoFlex can be run from each receiver.

> Ten brightness levels of the LED, dim or brighten by 10%.

> Use this product for a variety of applications (on the plinth, on the underside of the bed, above cabinets/wardrobes to up-light the ceiling to name a few).

Product FAQs

Can the cut section of this product be re-used?

No, once the strip has been cut the female end of the strip will need to be discarded.

What do I need to run this product?

For each maximum 6m run of the DuoFlex you require; one driver, one receiver, one driver connection lead (2.5m) and one remote control. (Alternatively to the remote & receiver option you can purchase a starter pack containing an inline switch - SE10053D1).

What's included in the packs?

Flexible strip(s) - the quantity and length of each strip is stated in the table. A 2.5m driver connection cable. A 15W or 30W Driver and either a Remote control & receiver or an Inline Switch (stated in table).

Can I run flexible strip lighting under a dishwasher?

The flexible strip itself cannot be run along/under the dishwasher, we supply extension cables for the flexible strips which would need to be interlinked and run around the back of the dishwasher to not break the run of strips.

Can I bend the flexible strip on a corner?

No, the flexible strip cannot be bent on a corner, to get around corners you should use the 50mm corner connection cable.

If I cut the flexible strip will the wattage remain the same?

No, the wattage of the strip would be reduced by how much is cut off (how many LED's). For example if a 2m strip has a wattage of 15W and 1m is cut off the wattage of the 2m strip will reduce to 7.5W.

One end of the flexible strip appears to be blank.

The male end of every flexible strip is supplied with an end cap covering the pins to protect them. For interlinking and connecting to the driver connection cable this end cap must be removed.

See more FAQs (5)
From: £24.70
From: £2.64
From: £2.88
From: £14.28