SE20015C0

Compact

Compact Multi-point LED Flexible Strip

This LED flexible strip contains more diodes, located closer together than any other Sensio flexible strip light. This means there are no darks spots, for a more diffused light cast.

Recommended Location

Hint

Create a relaxing atmosphere by adding flexible strip lighting beneath the bed and above wardrobes

From: £57.00
Where to Buy
Ordering options
 CodeColour TemperatureDriverLED ColourLengthLumensPack QtyWattage
SE20005W03000K
Warm White335mm110Lm 2W
SE20015C05000K
Cool White1m360 lm 6W
SE20015C15000KIncluded in pack Cool White1m330 lm16W
SE20015W03000K
Warm White1m330 lm 6W
SE20015W13000KIncluded in pack Warm White1m330 lm16W
SE20025C05000K
Cool White2m720 lm 12W
SE20025C15000KIncluded in pack Cool White2m720 lm112W
SE20025W03000K
Warm White2m660 lm 12W
SE20025W13000KIncluded in pack Warm White2m660 lm112W

CodeDescriptionColour Coding
SE40553 6W Driver with 4 Port JB4 Distribution Block
SE40555 15W LED Driver with 6 Port JB4 Distributor
SE40556 30W LED Driver with 12 Port JB4 Distributor

Product Features
  • FinishWhite

    Hint

  • LED ColourCool & Warm White

    Hint

    This fitting is available in either cool white or warm white LED

    Read more
  • Lamp Life13 years

    Hint

  • Beam Angle110°

    Hint

  • DimmableDimmable

    Hint

    This light is dimmable via dimming controls from the Sensio range

Key points:

> A higher number of diodes per flexible strip means there are minimal dark spots. This provides a nicer finish when used on a plinth in a room with a glossy floor finish or in an aluminium profile.

> Self-adhesive 3M tape backing allows for quick and simple installation.

> Male and female ends on the strip allow you to create the length required.

> The strip can be cut to length, scissor marks on the product mark where suitable to cut (every 65mm).

> Re-use a cut section of the strip ONCE using the mini-cut connector (SE90317HD).

> Use this product for a variety of applications (on the plinth, on the underside of the bed, above cabinets/wardrobes to up-light the ceiling to name a few).

> All you need to install is an adequate amount of flexible strips, driver connection lead(s) – one per run of strips and a LED driver.

> Run 8m from one 50W driver (an extra 1.34m than the Vega).

Downloads
Accessories
SE90316HD
From: £2.15
SE90315HD
From: £2.52
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver