Basket Icon 0
There are no item(s) in the basket.
SE40625

6W LED Driver with 4 Port JB4 Distributor

SE40625

6W LED Driver with 4 Port JB4 Distributor

Use this driver with ORANGE colour coded products. The 6W driver is ideal if you have a small number of low wattage under cabinet lights.

Recommended Location

RRP: £16.68
Description

Use this driver with ORANGE colour coded products. The 6W driver is ideal if you have a small number of low wattage under cabinet lights.

Ordering options
Ordering options
 CodeDriverWattageStockRRPQty
SE40625
6WIn Stock£16.68
 IDCodeDriverWattageStockRRPQty
SE40625
6WIn Stock£16.68
CodeDescriptionStockColour CodingRRPQty
SE40525 15W LED Driver with 6 Port JB4 Distributor InStock
£22.68
SE40526 30W LED Driver with 12 Port JB4 Distributor InStock
£39.84
SE40548 Ultra Slim line 12V 30W driver InStock
£45.00
SE40625 6W LED Driver with 4 Port JB4 Distributor InStock
£16.68
CodeDescriptionStockColour CodingRRPQty
SE40525 15W LED Driver with 6 Port JB4 Distributor InStock
£22.68
SE40526 30W LED Driver with 12 Port JB4 Distributor InStock
£39.84
SE40548 Ultra Slim line 12V 30W driver InStock
£45.00
SE40625 6W LED Driver with 4 Port JB4 Distributor InStock
£16.68
Product Features
Product Features
  • Cable Length1.5 metres

    Hint

Key points:

This electronic LED converter is exclusively designed for LED products which are to be used indoors. The electronic converter has a switch mode power supply with 12VDC constant output voltage.

An electronic protection circuit switches off the electronic converter in case of short circuit or overload in the secondary circuit, overheat as well as open circuit. This convertor is a thermally protected device, the type of protection is automatic resetting. After removing the faults, the electronic LED converter is ready for operation again.

Specifications:

Maximum load: 6W
Minimum load: 0.5W
IP rating: IP20

Input voltage : 100~240VAC
Input frequency : 50/60Hz
Input current : max.0.16A
Input power factor : 0.4C
Constant output current : 700mA
Output voltage : 3~8.4VDC(CC) or 12VDC(CV)
Rated output power : 1~6 W

Dimensions:

Length: 58mm
Width: 34mm
Depth: 20mm





Product FAQs
Product FAQs

What is the length of the cable between the driver and the distribution block?

140mm

Can our products be used with those of other manufacturers?

We have not tested this so therefore do not recommend it.

Downloads
Downloads
Accessories
Accessories
Quantity
Quantity
x

Selecting the right driver

Divide the wattage of the driver by the wattage of a single light to determine how many lights can be run by the driver.

For example, 15W driver with 3W lights
15 ÷ 3 = 5 lights

Drivers are available in more than one wattage, work out the best option based on the number of lights you have.

Drivers have a limited number of ports. A driver with 6 ports is therefore limited to a maximum of 6 lights.

Ensure you consider both the wattage and number of ports on the driver.

x

Connecting by Colour

To simplify the process of selecting the appropriate driver for your lighting, Sensio use a simple colour coding system.

All components are colour coded:

driver
close